Multiverse® Studio Add On Kit

• Contactless Charging: The Multiverse Studio Kit has contactless charging in an easy to use kit.
• Choice of Broadcast Radio: Transmit and receive on either the 2.4GHz band or the 900MHz band. (P/N 5905 transmits and receives on the 2.4GHz band only.)
• Long Life Rechargeable Battery: 20 hour battery life with default settings
• Rugged and Splashproof: An IP61 rated plastic case, making it splashproof and rainproof (but not for permanent outdoor use).
• User Selectable SHoW IDs: City Theatrical has always produced wireless DMX products that allow the user to select the optimum transmission method. Users may select full bandwidth hopping, hopping limited to a section of the spectrum (including areas of the spectrum outside of the Wi-Fi range), or adaptive hopping.
• Adaptive Spread Spectrum Frequency Hopping: Adaptive Spread Spectrum Frequency Hopping identifies and masks off hopping channels that contain interference, replacing them in the hop sequence with alternate channels.
• Adjustable Output Power: Sometimes an application calls for the most available broadcast power, but many entertainment systems can utilize lower output power to reduce detrimental effects on other radio systems in the venue, reduce reflections, and improve performance. 
• Ultra Low Latency: Total average system latency of 4ms. 
• mDMX (Multiverse SHoW IDs only) 
• mRDM (Multiverse SHoW IDs only)
• SHoW Key Security (Multiverse SHoW IDs only) 
• Forward Error Correction (Multiverse SHoW IDs only) 
• Protocols supported: ANSI E1.11 DMX512-A; E1.20 RDM
• Compatible with all Multiverse and SHoW DMX Neo products
• User can select a single universe to receive
• A very simple user interface to set SHoW ID, universe, and other features
• RDM proxy and responder functions
• USB-Power Adaptor and USB-A to USB-C cable included
• Selectable display timeout and brightness level
• Selectable Auto Off Timeout
• Battery Time Remaining displayed in both hours/minutes and percent

Need help getting started? The USB flash drive included with each kit contains the user manual for each product in the kit, software downloads, and other useful information. Here are the three basic steps involved in setting up a system:

1. Use the RadioScan Spectrum Analyzer to view the radio activity in the spectrum around you, and choose the area of the spectrum in which you want to broadcast. Use the Multiverse SHoW IDs tab on RadioScan to help choose a SHoW ID.

2. Enter the SHoW ID you chose into the Multiverse Transmitter or Multiverse Node you are using, and into each Multiverse Studio Receiver.

3. Enter the universe you are broadcasting, and an optional SHoW Key, into the Multiverse Transmitter or Multiverse Node you are using, and into each Multiverse Studio Receiver.