Search for:
| Date | Bulletin# | Product | Description |
|---|---|---|---|
| 10/21/2021 | 1000 | Aquafog 3300 | Revised method of attaching wheels to axle |
| 10/21/2021 | 1001 | AutoYoke | D39 diode |
| 10/21/2021 | 1002 | WDS 15A Dimmer | Updated software V2.3 |
| 10/21/2021 | 1004 | WDS 15A Dimmer | Best practices for incandescent lamps |
| 10/21/2021 | 1006 | Aquafog 3300™ | Methods for repairing an Aquafog pump |
| 10/21/2021 | 1008 | Products with Anderson connectors | Installation instructions for Anderson connectors |
| 10/21/2021 | 1009 | AutoYoke | A change in the pan and tilt motor mounts |
| 10/21/2021 | 1010 | AutoYoke | Clarification of differences in lens mounting brackets in different generations |
| 10/21/2021 | 1011 | Aquafog 3300™ | A change in the Aquafog pump mounting bracket |
| 10/21/2021 | 1012 | Show DMX Neo® | How to perform a wireless DMX site survey |
| 10/21/2021 | 1014 | WDS 15A Dimmer | New dimmer curves are available |
| 10/21/2021 | 1015 | WDS and SHoW DMX | Proper installation of remote antenna cables |
| 10/21/2021 | 1016 | EFX Plus2 | How to check or change input voltage |
| 10/21/2021 | 1017 | PDS-50 and MasterBlast Controller | New firmware to improve battery life |
| 10/21/2021 | 1018 | PDS-750 TRX | The PCBA Temperature Sense IC U29 (Microchip TC74) on some units may fail at elevated temperatures. |
| 10/21/2021 | 1019 | PDS-750 TRX and PDS-375 TRX | Incompatible USB memory sticks |
| 10/21/2021 | 1021 | PDS-750 TRX™ | Units with serial numbers listed below may have been programmed with incorrect MAC Address and RDM UID |
| 10/21/2021 | 1022 | PDS-750 TRX and PDS-375 TRX | A DMX termination issue is corrected |
| 10/21/2021 | 1023 | PDS-375 TR™ | PDS TRX power supply SHoW DMX Neo compatibility |
| 10/21/2021 | 1027 | D2 and D4 Dimmers | A firmware bug has been found in the D2/D4 Dimmers |
| 10/21/2021 | 1030 | Candle PWM Dimming | City Theatrical added a 100uF 10V electrolytic capacitor (City Theatrical part number 101-00059) between J7 (+) and J3 (-) on the candle PCB. Set your dimmer PWM output frequency to 1KHz or 1.2KHz, depending on model. To use City Theatrical’s dimmers with the new modified candles, you must set the Curve and the Mode to the proper settings, which are outlined in Tech Bulletin 1030. (Only affects City Theatrical Part Numbers: 3450, 3451, 3470, 3471, 3472, and 3473 Candle Kits/Sticks.) |
| 10/21/2021 | 1031 | QolorFLEX Dimmers 5722 & 5742 | The latest firmware for 5722M and 5742M require minimum level of firmware installed in the 5792M SHoW DMX Neo Max radio module. |
| 10/21/2021 | 1032 | Firmware for QolorPIX Tape Controller, Eight Output | The QolorPIX controller can experience a screen lockup after numerous keypresses while navigating menus. The lockup will periodically persist through a power cycle. The 5850 Firmware update 1.0.0.9.0.4 fixes these lockups. |
| 10/21/2021 | 1034 | ColorSource SHoW DMX Compatibility | ETC’s ColorSource wireless relay system uses 5792 SHoW DMX Neo radio module firmware v3.3.x to be compatible with ETC’s RDM network. City Theatrical’s SHoW DMX product line uses 5792 firmware 2.13.x. When the two systems are intermixed, compatibility issues may appear. To correct this compatibility issue, it is recommended to upgrade CTI product to radio 5792 firmware 3.3.x. See details in Tech Bulletin 1032 |
| 10/21/2021 | 1037 | Multiverse wireless DMX/RDM Approved Antennas | This tech bulletin displays a table that lists all the approved antenna that can be used on Multiverse products and radio modules for OEM integration |
COMPANY
RESOURCES