/
Pathway
pathway

PWPP Rack Mount DMX Gateway, 8-Port

PWPP Rack Mount DMX Gateway, 8-Port, the Pathport® Secure DMX-RDM Ethernet Rack-mount Gateway (Legacy Name: Pathport OCTO) is an eight-port version of the popular DMX-over-Ethernet management gateway.

Connect DMX512 control devices and send data over an Ethernet network to DMX512-capable end devices such as intelligent lighting fixtures, LEDs, Dimmers, and more. Each port can be configured as an Input or Output as needed. Advanced features include extensive protocol support, slot-by-slot patching using multiple sources, cross-fading on priority change, and signal loss behavior. 

Multiple connector options are available, such as 5-Pin XLR, terminal block, and RJ45 etherCON®. Status LEDs for each port provide instant confirmation of DMX activity and direction. The LCD display and encoder knob allow for front panel configuration and reporting of the most commonly used features, such as IP address and subnet mask, port direction, and protocol selection. Different Ethernet protocols may be merged together and prioritized.

For more information, visit Pathway Connectivity's PWPP Rack Mount DMX Gateways product page.

 

2022 Product Name 2022 Part Number Legacy Description Legacy Part Number
       
Pathport, Rack-mount, 8-Ports, XLR 5-Pin Female, Rear Panel Connectors PWPP RM P8 XLR5F REAR Pathport OCTO 8-port Gateway, Rear XLR5F P6421
       
Pathport, Rack-mount, 8-Ports, Compression Fit Terminal, Rear Panel Connectors PWPP RM P8 TERM REAR Pathport OCTO 8-port Gateway, Rear Terminals P6422
       
Pathport, Rack-mount, 8-Ports, XLR 5-Pin Female, Front Panel Connectors PWPP RM P8 XLR5F FRONT Pathport OCTO 8-port Gateway, Front XLR5F P6423
       
Pathport, Rack-mount, 8-Ports, Front XLR 5-pin Female, Rear Terminal, Front and Rear Panel Connectors PWPP RM P8 XLRTERM FRTRR Pathport OCTO I/O Node, c/w Front XLR & Rear Terminals P6424
       
Pathport, Rack-mount, 8-Ports, XLR 5-Pin Female, Front and Rear Panel Connectors PWPP RM P8 XLR5F FRTRR Pathport OCTO I/O Node, c/w Front XLR & Rear XLR P6425
       
Pathport, Rack-mount, 8-Ports, RJ45 EtherCON, Rear Panel Connectors PWPP RM P8 RJ45EC REAR Pathport OCTO 8-port Gateway, Rear RJ45 etherCON P6426
       
Pathport, Rack-mount, 8-Ports, RJ45 EtherCON, Front Panel Connectors PWPP RM P8 RJ45EC FRONT Pathport OCTO 8-port Gateway, Front RJ45 etherCON P6427
       
Pathway Accessory, Large Rack-mount to Wall-mount kit PWACC WMLG Wall mount kit (Repeater, Repeater Pro, OCTO, VIA) P9002
       
Pathway Accessory, Large Rack-mount to Truss-mount kit PWACC TMLG Truss mount kit (Repeater, Repeater Pro, OCTO, VIA) P9003
  •  

 

 

Pathway Connectivity landing page banner

Additional Information

  • Eight DMX512 ports, individually configurable
  • 10/100Mb Ethernet port
  • Front panel UI supports configuration ofIP settings, port direction, basic patching and more
  • Route DMX on either a universe or channel-by-channel basis
  • Map up to eight sources to each output channel, with merge and/or priority options user-set for each source
  • Acts as E1.20 RDM proxy controller, when used with freely downloadable Pathport Manager software
  • DMX output speed and signal loss behaviour user-selectable
  • Silent, fanless operation
  • Rackmount ears included
  • Wide-range power input
  • Supports the following Ethernet protocols: E1.31 streaming ACN (sACN), Art-Net, Pathport Protocol, Shownet
  • 100-240VAC, 50/60Hz wide-range power input
  • 0.08A maximum power consumption
  • Operating Conditions: 14°F to 104°F (-10°C to +40°C), 10-90% relative humidity, non-condensing

 

Control Device Type Gateway
   
Mounting Location Portable
   
Mounting Type Clamp, Desktop, Rack Mount, Surface
   
Product Type Gateway
   
Network Compatibility DMX, RDM
   
Networkable Control Yes
   
Voltage Rating Line Voltage, Low Voltage, MVOLT
   
# of Comm. Ports 8
   
Receiving Protocol RDM, RDMnet, DMX, Dry Contact, Ethernet
   
Sending Protocol DMX, RDM, RDMnet, sACN
   
Dimming Protocol DMX, RDM, RDMnet, sACN
   
Compliance Listing CA Title 1.81.26, ROHS
   
Regulatory Listing CE, ETL
   
Series PWPP

Title Description
pdf Pathway Connectivity Pathport C-Series at National Music Forum in Wroclaw, Poland The National Forum of Music (NFM), a brand-new, state-of-the-art concert venue in the heart of Wroclaw, opened on September 4th, 2015. The National Forum of Music is the largest multi-purpose center in Lower Silesia, Poland. The main aim of the center was to create a public institution comprising the Ministry of Culture and National heritage. The NFM needed to come up with a solution to help light all these separated theatres and rooms, without the hassle of cables and wiring. They chose City Theatrical wireless DMX solutions and Pathway Connectivity PATHPORT® C Series nodes in the NFM installation. “In our current situation with the National Forum of Music, we often come across the necessity of conversion of commonly used Ethernet signal into the Traditional DMX standard. The Ethernet signal simultaneously transmits multiple DMX signals and the Pathway node can isolate the desired DMX universe without the necessity of using extra power supplies- the power is being supplied by Ethernet due to POE option. The pathway node is extremely useful to use, the setting is configured from simple software from any computer. The greatest thing about the Pathway C-Series node is that it works impeccably no matter what project we’ve worked on.”
Load more reviews
Thank you for the review! Your review must be approved first
Rating
Comment by from
Rating