Walkway Over The Hudson
Learn how Multiverse Vero Outdoor Wireless DMX/RDM was used to relay the wireless DMX signal across the Walkway bridge over the Hudson River, New York, USA between the towns of Poughkeepsie and Highlands, in this City Theatrical case study.
City Theatrical's Multiverse Vero Outdoor Wireless DMX/RDM for the Walkway Over the Hudson River, Upstate New York, USA
ETC Representatives Nick Emerick and Gary Dulanski of The Dulanski Group of Purchase, New York, USA and the lighting team for Walkway Over The Hudson project were looking for a robust and reliable wireless DMX solution for this outdoor lighting installation that stands high above the Hudson River, through the extremities of all seasons in beautiful upstate New York. They were looking to relay the wireless DMX signal across the bridge from the administration building on the far west end of the walkway to locations across the span of the bridge.
Discover more about their experience with the Multiverse Vero Transceiver for outdoor-grade wireless DMX/RDM and Yagi Long Range Antennas in this City Theatrical wireless DMX case study Q&A with Gary Dulanski.
CASE STUDY:
Multiverse Vero Transceiver Outdoor Wireless DMX/RDM for the Walkway Over The Hudson between Poughkeepsie and Highlands, New York, USA
City Theatrical long range Yagi antennas used at Walkway Over the Hudson. Photos Courtesy of The Dulanski Group.
Walkway Over the Hudson
Walkway over the Hudson is a steel cantilever bridge spanning the Hudson River between Poughkeepsie, New York, on the east bank and Highland, New York, on the west bank. Built as a double track railroad bridge, it was completed on January 1, 1889, and formed part of the Maybrook Railroad Line of the New York, New Haven and Hartford Railroad.
It was taken out of service on May 8, 1974, after it was damaged by fire. It was listed on the National Register of Historic Places in 1979, and its entry updated in 2008.
The bridge was reopened on October 3, 2009, as a pedestrian walkway as part of the new Walkway Over the Hudson State Historic Park.
The New York State Bridge Authority owns and is charged with maintaining the bridge structure (as directed by the Governor and Legislature in July, 2010). The park is operated by the New York State Office of Parks, Recreation and Historic Preservation.
In 2017, the walkway hosted 593,868 visitors. The park connects the Hudson Valley Rail Trail in Highland to the William R. Steinhaus Dutchess Rail Trail, and forms part of the Empire State Trail.
INTRODUCTION
In order to incorporate Multiverse wireless DMX/RDM into the ETC Mosiac show control system that operates the new RGBW LED light fixtures on the Walkway Over The Hudson bridge, The Dulanski Group’s Gary Dulanski and Nick Emerick used multiple sets of Multiverse Vero Wireless DMX/RDM Transceivers and long range Yagi Antennas to relay the wireless DMX signal across the bridge from the administration building on the far west end.
Walkway Over the Hudson Historic State Park
THE CASE STUDY Q&A WITH GARY DULANSKI OF THE DULANSKI GROUP:
City Theatrical (CT): Hi Gary! Can you tell us more about implementing wireless DMX for the recent lighting update at Walkway Over the Hudson?
Gary Dulanski (GD): We were looking to incorporate Multiverse wireless DMX/RDM into the ETC Mosiac Show Control System we chose to operate the new RGBW LED light fixtures by GVA Lighting on the Walkway Over The Hudson bridge.
We have used Multiverse wireless DMX/RDM before with ETC fixtures, and we knew it was reliable and would last. The Multiverse Vero Transceiver in a custom enclosure solution was perfect for this outdoor installation that stands high above the Hudson River, to stand against the extremities of all seasons in beautiful upstate New York.
We used multiple sets of Multiverse Vero Wireless DMX/RDM Transceivers, encased in custom stainless-steel enclosures by ETC, as well as long range Yagi Antennas by City Theatrical to relay the wireless DMX signal across the bridge from the administration building on the far west end of the walkway.
Sam Updike of At Full Lighting and Gary Dulanski of the Dulanski Group.
“We have used Multiverse wireless DMX/RDM before with ETC fixtures, and we knew it was reliable and would last. The Multiverse Vero Transceiver in custom enclosures solution was perfect for this outdoor installation that stands high above the Hudson River, and able to stand against the extremities of all seasons in beautiful upstate New York.”
- Gary Dulanski, The Dulanski Group
The bridge before the recent lighting installation.
CT: Why was wireless DMX the right solution for this outdoor architectural lighting installation?
GD: It was cost prohibitive to have electrical conduit installed for a hardwired solution across the entire length of the bridge, so we knew Multiverse Vero wireless DMX/RDM was the right solution for this outdoor installation.
The team was not streaming DMX to fixtures; their system was set up to send DMX triggers to the ETC show controllers located at three locations on the bridge.
CT: Can you walk us through some of the steps in this expansive wireless DMX installation?
GD: Sure, let’s walk through some site photos of the Walkway Over The Hudson:
The lighted areas are called 'Belvederes'. There are three Belvederes spaced across the bridge. They act as lookout points and resting places for visitors.
The ETC Mosaic show controllers and City Theatrical Multiverse Vero Wireless DMX/RDM transceivers are mounted inside of custom stainless steel enclosures, which are mounted to the railings around the bridge, as shown.
CT: What was your wireless DMX system composed of at each location?
GD: Most locations have a transmit and receive Yagi antenna and Multiverse Vero pair to relay the wireless DMX/RDM commands down the length of the bridge. The end locations just have one.
The locations are spaced and staggered as per the direction from City Theatrical’s engineering team.
One of the long range Yagi antenna and Multiverse Vero Transceiver pair locations.
The first few transceiver antenna locations are visible at the entrance of the Walway Over the Hudson, as seen here. There are a total of nine locations.
"My colleague Dan Keenan and I set up each Multiverse Vero pair. We elected to configure in the 900MHz band, to prioritize a stable data transmission. The setup and configuration were a breeze with the beautiful high contrast screen on each Multiverse Vero, which is easily readable in the strongest sunlight.
The bridge experiences large temperature swings and strong wind. In the morning, it can be calm and cool, and in the afternoon, it can be exceedingly hot and sunny with a tremendous wind. Luckily, each Multiverse Vero Transceiver pair is additionally sheltered with a NEMA enclosure with no active heating or cooling. Our wireless DMX systems are doing just fine.
If we ever need a hand, we call City Theatrical technical support staff and get the issues resolved same day. It has been a very smooth process."
- David Singer, Service Technician, Lite-Trol Services
David Singer of Lite-Trol doing the initial startup on the system.
Sam Updike of At Full Lighting, programming the project.
CT: Do you know how far the wireless DMX broadcast goes, from location to location on the bridge?
CT: Have you had any outdoor-related issues?
GD: We've had no weather or humidity problems that I know of. We picked Multiverse Veros to put inside the stainless-steel enclosures instead of regular Multiverse transceivers because Multiverse Veros have the wider temperature limits and were designed for outdoor environments, so we didn't have to heat/cool the enclosure like we did for the Mosaic show controllers.
Everything has been working fine that I know of, for us as well as the design and bridge teams.
Sam Updike signing the ceremonial switch that turned on the lighting for the bridge in September 2023.
GD: The Multiverse wireless system is used to send DMX-based commands from the primary Mosaic Show Controller in the administration building out to the three show controllers on the bridge. The bridge controllers hold all the preset lighting looks and dynamic effects and feed DMX to the lighting fixtures.
The administration show controller holds master calendar and clock schedule information and incorporates a photosensor interface that adjusts the sunset turn-on time to allow for cloudy weather. The primary controller also sends master intensity commands throughout the night, for a setback at midnight, and then again at 2 AM. In addition to the color changing walkway lighting, the bridge controllers use DMX to control the intensity of handrail lights that never turn off due to safety, but do dim depending what primary show is being played, like the star gazing show. The system has a touchscreen to allow the park staff to temporarily override the calendar programming and select a different look for a special event, and to trigger a flashing red-yellow warning to help alert people to get off the bridge in inclement weather. Every action the bridge controllers take is a command sent over Multiverse.
For this project, we took advantage of the support of City Theatrical's engineering team, the known dependability of Multiverse technology, the robustness of the Multiverse Vero's design for exterior environments, the multiple SHoW ID capabilities, and the wide selection of City Theatrical's antenna solutions. It has been working out really well!
We hope that when you’re in the area, you will come and join the 600,000 visitors a year to appreciate the natural beauty of the Walkway over the Hudson. Make sure to stay for the light show after sunset, and you’ll “see” Multiverse Vero wireless DMX in action!
Domingo Gonzalez, lighting designer for the project (left of the switch), and John Storyk is the architect and bridge committee leader (right of the switch), and their teams.
For more information on Walkway over the Hudson, visit: https://walkway.org/
For more information about The Dulanski Group, visit: https://dulanski.com/
CITY THEATRICAL PRODUCTS USED
